Modern fibre optics require highly flexible termination boxes. Technetix has developed the APL with its customers, meeting their requirements of an appealing design, extreme robustness and open access.<\/p>\n
The box is designed for the management of pre-assembled fibres or splices. This innovative design offers long service life and maximum protection for your investment. The APL box can be wall mounted or flush-mounted. The metal mounting plate can be fixed on the wall and the box can be pre-assembled prior to fitting.<\/p>\n
The cover is secured with 2 Torx slotted screws (concealed under the logo), through the box on the mounting plate, to make a secure and durable connection. In this way the FTTH-box-APL protects your fibre installation, while having an inconspicuous design in a living area.<\/p>\n
For the fibre input, the following feed-throughs can be used:
\n1. Through the mounting plate from the socket for pre-assembled fibres.
\n2. From both sides through the break-outs, for example through the cable duct for pre-assembled fibres.
\n3. A conduit with up to \u00d8 10 mm can be secured to the base of the box, including strain relief and a micro-gas stop (for example ConnectCom, Commscope.) 3 holders for couplings are installed in the base, so up to 3 SC or 3 LC-duplex-couplings can be inserted and up to 6 patch cords (LC) can be connected. The couplings are labelled from 1 \u2013 6 on the cover. The left coupling (1-2) is open by default, the four others (3 \u2013 6) are concealed by break-out-covers, which can be opened as required. <\/p>\n
The fibre management system offers enough space to store excess lengths of fibre which can be crossed, if required. A holder for up to 12 splices is attached to the FTTH-box-APL and can be inserted into the fibre management system.<\/p>\n","protected":false},"excerpt":{"rendered":"